Login

Ebony is out!

Share your experience, tips & tricks, show off your music.

Re: Ebony is out!

Postby giancarlo » Tue Oct 03, 2017 11:25 pm

there will be a 48kHz pack soon. I think it is generated by 96, but I'm not sure. Ebony is using an old engine today, the new one is a lot more bug-fixed on the predelay side.

Anyway we are testing it in lemon, I'm not sure we'll release if not properly tested. What is important: lemon forced us to bugfix predelay completely.
User avatar
giancarlo
Founder
Founder
 
Posts: 10569
Joined: Mon Sep 21, 2009 10:40 pm
Location: Italy

Re: Ebony is out!

Postby markgalup » Thu Oct 05, 2017 8:16 pm

Excellent to hear, G - thanks for the input.

Any ETA on the 48-88 pack?
Mark Galup
Producer/Mixer/MFiT-Approved Mastering Engineer
MarkGalup.com
ReelRecording.com
Facebook | Twitter | Instagram

Acustica Audio Dealer for the USA -> Contact me for US Discounts
User avatar
markgalup
Expert
Expert
 
Posts: 526
Joined: Sun Feb 10, 2013 6:15 am
Location: Nashville, TN

Re: Ebony is out!

Postby giancarlo » Tue Oct 10, 2017 7:41 am

I think it was released yesterday or they will release it today. I'll check today if the tail bug disappeared in the 48 kHz pack as consequence of the new sample rate conversion.
User avatar
giancarlo
Founder
Founder
 
Posts: 10569
Joined: Mon Sep 21, 2009 10:40 pm
Location: Italy

Re: Ebony is out!

Postby lubomba » Tue Oct 10, 2017 12:07 pm

How long will ebony be in presale?
lubomba
Member
Member
 
Posts: 210
Joined: Sat Aug 18, 2012 8:23 pm

Re: Ebony is out!

Postby lubomba » Tue Oct 10, 2017 2:59 pm

I got a personal discount that is valid until october 25 where ebony (presale) is listet. So I assume the presale will last at least until then...
lubomba
Member
Member
 
Posts: 210
Joined: Sat Aug 18, 2012 8:23 pm

Re: Ebony is out!

Postby Support » Tue Oct 10, 2017 5:10 pm

Ebony 48/88 pack for OSX and Windows are in our upload queue. Please check if are available in next 24 hours in download section.

About pre-order, will end very soon, before next new product release, Lemon.
Best regards,
Enrique Silveti.
Acustica Audio customer and technical support
http://www.acustica-audio.com
User avatar
Support
Expert
Expert
 
Posts: 3111
Joined: Mon Feb 24, 2014 11:33 am
Location: Lodi, Lombardia, Italy.

Re: Ebony is out!

Postby Thierr7 » Wed Oct 11, 2017 12:06 pm

Why not a Dry/Wet knob for the Reverb plugin ? That would be nice to use it as an insert FX imo ...
User avatar
Thierr7
Vip Member
Vip Member
 
Posts: 442
Joined: Sat Jan 28, 2012 8:52 am

Re: Ebony is out!

Postby waffleneck » Fri Oct 13, 2017 12:45 am

Thierr7 wrote:Why not a Dry/Wet knob for the Reverb plugin ? That would be nice to use it as an insert FX imo ...


+/- 1
Amber, Aquamarine, Azure, Black, Blue, Coral, D361, Diamond, Ebony, Emerald, EQP1, Gold, Green, Honey, Ivory, Lime, Magenta, Navy, Nebula, N4, Ochre, Orange, Pearl, Pink, Pink Compressors, Prime, Purple, Red, Rose, Sand, Scarlet, Silk, Tan, Titanium, Trinity, Ultramarine, White. Hardware: TLA M8 Tubetracker, Vulture Super15, Fatso, Tube Vitalizer. Apogee Symphony. N*****n KH310 monitors + KH805 sub.
User avatar
waffleneck
User Level XI
User Level XI
 
Posts: 163
Joined: Sat May 18, 2013 1:08 am

Re: Ebony is out!

Postby HappyBaby » Fri Oct 13, 2017 6:00 pm

I have installed the 48KHz / 88.2KHz pack, but I am a little bit confused as far as the scope of what it updates... :?:

Is this update pack only apply for the Ebony channel strip, or does it updates as well the individual modules (EbonyEQ, EbonyPRE, and Ebony REV)?

If I remember correctly the Compressors like EbonyComp are frequency independent, and good to go from the start at any sample rates?

And a comment to say that the D473S Preamp is amazing on the master bus, and compete easily (and favorably?) with others options, like for example the very good output console preamps in Lime (or combined with them :idea: ).
HappyBaby
User Level I
User Level I
 
Posts: 10
Joined: Fri Jan 22, 2016 5:17 pm

Re: Ebony is out!

Postby Beatworld » Sun Oct 15, 2017 4:47 am

HappyBaby wrote:I have installed the 48KHz / 88.2KHz pack, but I am a little bit confused as far as the scope of what it updates... :?:

Is this update pack only apply for the Ebony channel strip, or does it updates as well the individual modules (EbonyEQ, EbonyPRE, and Ebony REV)

I use Mac AU.

I have not yet installed the 48/88.2 packs.
I see there are no other installers now (apart from in the " Old" folder)?

So are the new "updates" everything, including 44.1 ?

Confused.
Beatworld
User Level XI
User Level XI
 
Posts: 162
Joined: Sun Dec 07, 2014 7:36 am
Location: Perth

PreviousNext

Return to Ebony

Who is online

Users browsing this forum: No registered users and 1 guest